Parts for Capillary Column Connection

CUTTER,CAPILLARY TUBE

For cutting capillary columns

Capillary Cutter (Plate Type)

For cutting capillary columns

Press-Tight connector

Pack of 5. Used for capillary columns with inner diameter from 0.2 to 0.53 mm.

SLIT NUT

Pack of 5
For Graphite Ferrule

NON SLIT NUT

Pack of 10
For Graphite Ferrule

Graphite Ferrule 0.5

Pack of 10
For columns with an outer diameter less than 0.5 mm

Graphite Ferrule 0.8

Pack of 10
For columns with an outer diameter less than 0.8 mm

Graphite jig, WBI

221-41532-01

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, BID (BID Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, SPL (SPL/PTV Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, FID (FID Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, ECD_43mm (ECD Column insertion jig)

Refer to Method for distinguishing the different ECD flow paths and use for flow line path A. Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, ECD_32mm (ECD Column insertion jig)

Refer to Method for distinguishing the different ECD flow paths and use for flow line path B. Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, FPD (FPD Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, TCD (TCD Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, FTD (FTD Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

Graphite jig, STCD (STCD Column insertion jig)

Use it to fix the graphite ferrule temporarily on the column.

ClickTek Connector

ClickTek Ferrule For Narrow Bore 0.43

ClickTek Ferrule For Middle Bore 0.5

ClickTek Ferrule For Wide Bore 0.73

ClickTek Ferrule Holeless

221-81162-00

Use it for sealing.

Pre-Fix Tool Ver.2

ClickTek Ferrule Installation Kit for Narrow Bore/Middle Bore

221-82335-41

ClickTek Ferrule Installation Kit for Wide Bore

221-82335-42

ClickTek adapter for SPL

221-77156-41

ClickTek adapter for FID

221-77156-42

ClickTek adapter for TCD

221-77156-43

ClickTek adapter for BID

221-77156-44

ClickTek adapter for FTD

221-77156-45

ClickTek adapter for FPD

221-77156-46

ClickTek adapter for TCD Ver.2

221-77156-53

ClickTek adapter for ECD Ver.2

221-77156-57

Refer to Method for distinguishing the different ECD flow paths and use it for flow line path A.

ClickTek adapter for ECD-U Ver.2

221-77156-61

Refer to Method for distinguishing the different ECD flow paths and use it for flow line path B.

ClickTek adapter for BID Ver.2

221-77156-58

ClickTek adapter for FTD Ver.2

221-77156-59

ClickTek adapter for STCD Ver.2

222-31327-41

AU GASKET

221-48990

Heating Cup For ClickTek

221-76508-41

Graphite Vespel Ferrule GVF-16-004

Pack of 10. Used for columns with inner diameter of 0.25 mm or less.

Graphite Vespel Ferrule GVF-16-005

670-15003-04

Pack of 10. Used for columns with inner diameter of 0.32 mm.

Graphite Vespel Ferrule GVF-16-008

670-15003-07

Pack of 10. Used for columns with inner diameter of 0.53 mm.

Graphite Vespel Ferrule GVF-16-000

670-15003-01

Pack of 10 Vespel ferrules without a hole.
Used to seal the interface during maintenance, such as when checking the vacuum state.

NUT, SSNE16/012

Pack of 5. Used for connecting Vespel ferrules.
Used for HS-20, GCMS, and SCD.

AU GASKET

221-48990

Column Installation Jig (for INJ)

Included in tool kit (sold separately). Equivalent to part number 225-11657-09.

Graphite Vespel jig, SCD (SCD Column insertion jig), Short

221-83764-01

For left installation model

Graphite Vespel jig, SCD (SCD Column insertion jig), Long

221-83764

For right installation model